CAPINTEC, INC. CAPRAC
®
-t
April 2021 TESTS 9-9
To perform the System Test, from Figure 9-6 Quality Assurance Screen, touch the SYSTEM
TEST button. Figure 9-9 System Test Measurement Screen will appear.
Note: If the Test Source information has not been entered, the message “System Test
Error Unable to find Cs137 Test Source Please fill out Test Source Setup” will
appear.
Figure 9-7 System Test Measurement Screen
To exit Figure 9-9 System Test Measurement Screen, touch the CANCEL button. Figure 9-6
Quality Assurance Screen will re-appear.