CAPINTEC, INC. CAPRAC
®
-t
6-18 WELL COUNTER INITIALIZATION April 2021
Source Calibrated On Field
For the source’s calibration date, Figure 6-14 Date/Time Screen will appear.
Figure 6-14 Date/Time Screen
The screen displays the currently set date and time. Above and below each of the
fields are + and – buttons, respectively. To adjust the displayed value for a specific
field, touch the + button to increase the displayed value or the – button to decrease
the displayed value.
For the year, +10 and -10 buttons are provided to quickly change the tens column of
the years.
Adjust the displayed date and time to show the calibration date/time of the source.
Touch the ACCEPT button to accept the set calibration date and time. Figure 6-13
Measure Efficiency Screen will re-appear with the Source Calibrated On: field box
populated with the entered calibration date and time.
To cancel any changes and return to Figure 6-13 Measure Efficiency Screen, touch
the CANCEL button.
To Next Page
Loading...