Cisco 7925G Administration Guide

ASCII
For ASCII keys, you enter a character string that uses 0-9, A-Z (upper and lower case), and all symbols,
with one of the following key sizes:
40-bit
You enter a 5-character string; for example, GREG5.
128-bit
You enter a 13-character string; for example, GREGSSECRET13.
Set Up WEP Keys
To set up WEP keys, follow these steps.
Procedure
Step 1
Choose the network profile that uses Open+WEP or Shared+WEP.
Step 2
In the Key Type area, choose one of these character formats:
•
Hex
•
ASCII
Step 3
For Encryption Key 1, click Transmit Key.
Step 4
In the Key Size area, choose one of these character string lengths:
•
40
•
128
Step 5
In the Encryption Key field, enter the appropriate key string based on the selected Key Type and Key Size.
See WEP Key Formats, on page 84.
Step 6
Click Save to make the change.
Related Topics
IP Network Settings, on page 92
Set Up Alternate TFTP Server, on page 93
Set Up Advanced Profile Settings, on page 94
EAP-TLS Authentication Certificates
EAP-TLS is a certificate-based authentication that requires a trust relationship between two or more entities.
Each entity has a certificate proving its identity and is signed by a trusted authority. These certificates are
exchanged and verified during EAP-TLS authentication.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
85
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Wireless Security Credentials

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g