Cisco 7925G Administration Guide

Phone Attributes Setup
You can assign attributes on the Cisco Unified Wireless IP Phone that can be used to distinguish it from other
mobile devices connected to the Wavelink server. These attributes can be used as search criteria for locating
phones on the Wavelink server. For example, the predefined ModelName field of CP7925G is used to identify
a device as the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G.
To assign attributes, use the Wavelink Management Console, the phone UI, or the phone web page:
•
If you use the Wavelink Management Console, choose the Add Properties option from the Client Settings
option (for a single phone) or the Edit Device Properties option (for a mobile device group). For more
information, see the Wavelink Avalanche server documentation.
•
If you assign attributes from the phone or phone web page, use the following sections to define values
for the CustomName and CustomValue fields.
Define CustomName and CustomValue on Phone
To define the CustomName and CustomValue fields from the phone, follow these steps:
Procedure
Step 1
On the main phone screen, choose SETTINGS > System Configuration > Wavelink.
Step 2
Unlock the phone by pressing **#.
Step 3
Scroll to a CustomName, enter an attribute name (for example, “User”), and click Save.
Only alphanumeric characters are allowed in the CustomName
field.
Note
Step 4
Scroll to CustomValue and enter a value for the corresponding CustomName (for example, “Admin”), and
click Save.
You can define up to four pairs of custom parameters.
Define Custom Parameters from Phone Web Page
To define customer parameters from the phone web page, follow these steps:
Procedure
Step 1
From the phone web page, choose Wavelink Settings.
Step 2
In the Wavelink Custom Parameters section, enter values in the Name and Value fields. You can define up
to four pairs of custom parameters.
Do not use spaces in the Name
field.
Note
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
136
Wavelink Avalanche Server
Phone Attributes Setup

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g