Cisco 7925G Administration Guide

Step 5
From the Microsoft Certificate Services Request a Certificate page, select Advanced certificate request to
initiate the signing request.
Step 6
At the Advanced Certificate Request page, select Submit a certificate request by using a base-64-encoded
PKCS CMC.
Step 7
Copy the certificate data from the Cisco Unified Wireless IP Phone and paste it in the Saved Request text
box, then click Submit.
Step 8
After the CSR is approved, the certificate must be exported in a DER encoded format and sent to the original
requestor.
Step 9
Return to the phone web page and choose Certificates to import the signed certificate.
Step 10
On the Certificates page, locate the User Installed certificate line, and click Import.
Step 11
Browse to the certificate on your PC to import to the phone.
Install Authentication Server Root Certificate
To install the Authentication Server Root Certificate on the phone, follow these steps.
Procedure
Step 1
Export the Authentication Server Root Certificate from the ACS. See ACS Certificate Export Methods, on
page 88.
Step 2
Go to the phone web page and choose Certificates.
Step 3
Click Import next to the Authentication Server Root certificate.
Step 4
Restart the phone.
Set Up ACS User Account and Install Certificate
To set up the user account name and install the MIC root certificate for the phone on the ACS, follow these
steps.
For more information about using the ACS configuration tool, see the ACS online help or the User Guide
for Cisco Secure ACS for Windows.
Note
Procedure
Step 1
From the ACS configuration tool User Setup page, create a phone user account name if it is not already set
up.
Typically, the user name includes the phone MAC address at the end (for example,
CP-7925G-SEPxxxxxxxxxxxx). No password is necessary for EAP-TLS.
Make sure the user name matches the Common Name field in the User Certificate Installation page.
See Request and Import User-Installed Certificate, on page 89.
Note
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
90
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Wireless Security Credentials

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g