Cisco 7925G - Customize User Options Web Page Display

Customize User Options Web Page Display
Most options that are on the User Options web pages appear by default. However, you must set the following
options using Enterprise Parameters Configuration settings in Cisco Unified Communications Manager
Administration:
•
Show Ring Settings
•
Show Line Text Label Settings
•
Show Call Forwarding
The settings apply to all User Options web pages at your site.Note
To specify the options that appear on the User Options web pages, follow these steps.
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose System > Enterprise Parameters.
The Enterprise Parameters Configuration window displays.
Step 2
In the CCMUser Parameters area, specify whether a parameter appears on the User Options web pages by
choosing one of these values from the Parameter Value drop-down list box for the parameter:
True
Option displays on the User Options web pages (default).
False
Option does not display on the User Options web pages.
Show All Settings
All call forward settings display on the User Options web pages (default).
Hide All Settings
No call forward settings display on the User Options web pages.
Show Only Call Forward All
Only Call Forward All Calls displays on the User Options web pages.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
173
Features, Templates, Services, and Users
Customize User Options Web Page Display