EasyManuals Logo

Cisco 7925G Administration Guide

Cisco 7925G
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
DescriptionItem
Identifier for the wireless regulatory region in which this phone must
operate
WLAN Regulatory Domain
Unique code that identifies the phone as a Cisco productUSB Vendor/Product ID
Manufacturer-assigned unique MAC address for the USB Remote
Network Driver Interface Specification (RNDIS) for the phone
USB RNDIS Device Address
Manufacturer-assigned unique MAC address for the USB RNDIS for
the host
USB RNDIS Host Address
Wireless LAN Statistics Section
The Wireless LAN Statistics section provides information about packets that have been received and transmitted
by the phone. The following table describes the statistics.
Table 46: Wireless LAN Statistics items
DescriptionItem
Rx Statistics
Number of packets received successfullyRx OK Frames
Number of packets received with errorsRx Error Frames
Number of packets received that are unicast trafficRx Unicast Frames
Number of packets received that are multicast trafficRx Multicast Frames
Number of packets received that are broadcast trafficRx Broadcast Frames
Number of packets received frames checksum errorRx FCS Frames
Number of received beaconsRx Beacons
Number of rejected association attemptsAssociation Rejects
Number of failed association attempts due to timeoutAssociation Timeouts
Number of authentication attempts that the AP rejectedAuthentication Rejects
Number of failed authentication attempts due to timeoutAuthentication
Timeouts
Tx Statistics (Best Effort)
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
202
Remote Monitoring
Wireless LAN Statistics Section

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals