Cisco 7925G Administration Guide

For detailed information, see Bulk Administration Tool User Guide (Cisco Unified Communications
Manager Release 4.3 or later) or Cisco Unified Communications Manager Bulk Administration Guide
(Cisco Unified Communications Manager Release 5.0 or later).
Related Topics
Product-Specific Fields for Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G, on page
162
Softkey Templates, on page 166
Corporate and Personal Directories, on page 170
Add Users to Cisco Unified Communications Manager, on page 171
Custom Phone Rings Creation, on page 174
User Options Web Pages Management
From the User Options web page, users can customize and control several phone features and settings. For
detailed information about the User Options web pages, see Cisco Unified Wireless IP Phone 7925G, 7925G-EX,
and 7926G User Guide.
Set Up User Access to User Options Web Pages
Before a user can access the User Options web pages, you must use Cisco Unified Communications Manager
Administration to add the user to a standard Cisco Unified Communications Manager end-user group and
associate appropriate phones with the user.
You can use Cisco Unified Communications Manager Administration to control user access to the phone
web pages. For information about setting Web Access for users, see Product-Specific Fields for Cisco
Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G, on page 162.
Note
To set up user access, do the following.
Procedure
Step 1
For Cisco Unified Communications Manager Administration for release 5.x and later:
a) From User Management > User Group, choose User Management > End User.
b) Add the username.
c) Add the phone.
d) Associate the phone to the user.
e) Add the user to a user group.
Step 2
For Cisco Unified Communications Manager Administration for Release 4.x, see Cisco Unified Communications
Manager Administration Guide, “End User Configuration” section.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
172
Features, Templates, Services, and Users
User Options Web Pages Management

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g