Cisco 7925G Administration Guide

Security Configuration Fields, on page 176 describes the items that appear on this screen.
Step 3
To exit the Security Configuration screen, press the Back softkey.
Security Configuration Fields
Table 36: Security Configuration Fields
DescriptionField
Indicates web access capability for the phone.
Disabled
No user options web page access.
ReadOnly
Can view information.
Full
Can use configuration pages.
You configure web access in Cisco Unified Communications Manager
Administration.
Web Access
Displays the security mode that is set for the phone. You configure the
device security mode in Cisco Unified Communications Manager
Administration.
Security Mode
Indicates whether a manufacturing installed certificate (used for the
security features) is installed on the phone (Yes) or is not installed on
the phone (No). For information about how to manage the MIC for your
phone, see the “Using the Certificate Authority Proxy Function” chapter
in Cisco Unified Communications Manager Security Guide.
MIC
Indicates whether a locally significant certificate (used for the security
features) is installed on the phone or is not installed on the phone. For
information about how to manage the LSC for your phone, see the “Using
the Certificate Authority Proxy Function” chapter in
Cisco Unified Communications Manager Security Guide.
LSC
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
176
Security, Device, Model, Status, and Call Statistics Information
Security Configuration Fields

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g