EasyManuals Logo

Cisco 7925G Administration Guide

Cisco 7925G
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #215 background imageLoading...
Page #215 background image
CHAPTER 9
Remote Monitoring
Access Web Page for Phone, page 195
Cisco Unified IP Phone Web Page Information, page 196
Summary Information Area, page 196
Network Setup Information, page 197
Device Information Web Page, page 200
Wireless LAN Statistics Section, page 202
Network Statistics Section, page 204
Stream Statistics Menu, page 206
Access Web Page for Phone
To access the web page for a Cisco Unified Wireless IP Phone, perform the following steps.
Procedure
Step 1
Obtain the IP address of the Cisco Unified Wireless IP Phone using one of these methods:
Search for the phone in Cisco Unified Communications Manager by choosing Devices > Phones. Phones
that are registered with Cisco Unified Communications Manager display the IP address on the Find and
List Phones web page and at the top of the Phone Configuration web page.
On the Cisco Unified Wireless IP Phone, press SETTINGS > Device Information > Network and then
scroll to the IP Address option.
Step 2
Open a web browser and enter the following URL:
https://<IP_address>
where IP_address is the IP address of the Cisco Unified Wireless IP Phone
Note
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
195

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals