Related Topics
Access Phone Web Page, on page 69
Network Profiles, on page 74
Set Up Trace Settings, on page 96
System Settings, on page 104
Set Up Trace Settings
You can use the Trace Settings area on the web page to configure how the phone creates and saves trace files
(often used in troubleshooting). Because trace files are stored in the memory of the phone, you can control
the number of files and the data that you want to collect. Trace Settings Fields, on page 98 describes these
configurable items.
When preserving trace logs, choose only the logs that need to be saved after the phone is powered off and
powered on to avoid using up phone memory.
Note
To display the Trace Settings area, access the web page for the phone as described in the Access Phone Web
Page, on page 69, and then click the Trace Settings hyperlink under Setup. For information about the fields,
see Trace Settings Fields, on page 98.
Note
•
When set to False, the trace logs are lost when the phone is powered off.
•
When the phone is powered off, then powered back on, the Preserve Logs field is reset to False, the
default value.
There are various levels of tracing available that provide different levels of messaging:
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning
•
Notice
•
Info
•
Debug
To change the trace settings for the phone, follow these steps:
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
96
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Set Up Trace Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
