Cisco 7925G Administration Guide

User Voice Messaging System Access
Cisco Unified Communications Manager provides the flexibility to integrate with many different voice
messaging systems, including the Cisco Unity voice messaging system. Because you can integrate with many
different systems, you must provide users with detailed information about how to use your specific system.
You should provide this information to each user:
•
How to access the voice messaging system account.
•
The initial password for accessing the voice messaging system.
Make sure that you have configured a default voice messaging system password for all users.
•
How the phone indicates that messages are waiting.
Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
indicator (MWI) method.
For information about setting up the MWI method and the interface to the voice messaging system in
Cisco Unified Communications Manager, see the documentation for your system at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
If you are using a Cisco Unity voice messaging system, see the Cisco Unity documentation for your system
for configuring voice messaging and the initial passwords at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/tsd_products_support_series_home.html
See the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for information about
accessing the voice messaging system from the phone.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
234
Internal Support Website
User Voice Messaging System Access

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g