Cisco 7925G Administration Guide

Trace Settings
Displays the debug information for the phone. The following debug options are enabled from this
screen:
•
Remote syslog
•
Trace levels
•
Preserve logs
•
Preserve trace levels
Related Topics
Perform Site Survey, on page 46
Display Neighbor List, on page 45
Firmware Versions, on page 193
Call Statistics, on page 191
View Network Statistics, on page 189
View Status Messages Screen, on page 186
View Status Messages Screen
You can use the Settings menu and Status menu to view status messages for the Cisco Unified Wireless IP
Phone. The Status Messages screen displays up to 10 of the most recent status messages that the phone has
generated.
You can access this screen at any time, even if the phone has not finished starting up. Network Statistics
Fields, on page 189 describes the status messages that might appear. This table also includes actions you can
take to address indicated errors.
To view status messages, follow these steps:
Procedure
Step 1
Choose Settings > Status.
Step 2
Select Status Messages. The list of the status messages displays.
Step 3
To erase the messages, press Clear.
Step 4
To exit the screen, press Back.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
186
Security, Device, Model, Status, and Call Statistics Information
View Status Messages Screen

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g