Cisco 7925G Administration Guide

APPENDIX B
International User Support
•
International User Support Overview, page 235
•
Unified Communications Manager Endpoints Locale Installer, page 235
International User Support Overview
Translated and localized versions of the Cisco Unified IP Phones are available in several languages. If you
are supporting Cisco Unified IP Phones in a non-English environment, see the following section to ensure
that the phones are set up properly for your users.
Before you deploy the wireless IP phones, download the locale installer for the firmware releases and configure
the languages in Cisco Unified Communications Manager.
You can obtain translated documentation for the Cisco Unified IP Phones at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_translated_end_user_guides_
list.html
Unified Communications Manager Endpoints Locale Installer
By default, Cisco IP Phones are set up for the English (United States) locale. To use the Cisco IP Phones in
other locales, you must install the locale-specific version of the Unified Communications Manager Endpoints
Locale Installer on every Cisco Unified Communications Manager server in the cluster. The Locale Installer
installs the latest translated text for the phone user interface and country-specific phone tones on your system
so that they are available for the Cisco IP Phones.
To access the Locale Installer required for a release, access http://software.cisco.com/download/
navigator.html?mdfid=286037605&flowid=46245, navigate to your phone model, and select the Unified
Communications Manager Endpoints Locale Installer link.
For more information, see the documentation for your particular Cisco Unified Communications Manager
release.
The latest Locale Installer may not be immediately available; continue to check the website for updates.Note
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
235

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g