Cisco 7925G Administration Guide

Allows you to answer a ringing call or, after dialing a number, to place
the call.
Answer/Send button
(green)
13
Activates the softkey option displayed on the screen.Left softkey button14
When you set it up, allows you to directly access your messages or open
the Phone Book when the phone is idle.
Toggles the mute feature on or off.Mute button15
When the phone is idle, allows you to control the ring volume, turn on
the vibrate option, or turn off the ring.
Volume button16
When an incoming call is ringing, allows you to press this button once
to silence the ring for the call.
During a call, allows you to control the speaker volume for the handset,
headset, and speaker mode.
When the phone is docked in the desktop charger, the volume button on
the phone controls the volume of the charger speaker.
Use with XML applications, such as Push to Talk or other services.Application button17
Use with Java MIDlet applications to allow you to scan bar codes.Bar code scanner18
Available only on the Cisco Unified Wireless IP Phone
7926G.
Note
Cisco Unified Wireless IP Phone 7925G Desktop Charger Overview
The Cisco Unified Wireless IP Phone 7925G Desktop Charger provides the following features:
•
Charges the docked phone battery from line power
•
Contains a speakerphone, with the volume controlled by the phone volume buttons
•
Supports Bluetooth through the speakerphone
•
Displays status information using the Power/Bluetooth Status LED and Battery LED
•
Contains an additional port at the back of the station for charging a spare battery
•
Works on line power or from the spare battery for the phone
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
7
Cisco Unified Wireless IP Phone
Cisco Unified Wireless IP Phone 7925G Desktop Charger Overview

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g