Table 30: Configuration File Settings
For more information, see...Setting
Profile Settings Fields, on page 138Profile Settings
WLAN Settings
Network Settings
USB Settings Field, on page 143USB Settings
Trace Settings Fields, on page 143Trace Settings
Wavelink Settings Fields, on page 144Wavelink Settings
To update settings in the phone configuration file, follow these steps:
Procedure
Step 1
Right click 7925CU (in a folder under Software Collections) to launch the CU.
Step 2
From the left pane, choose the settings you wish to configure:
•
Profile Settings
•
USB Settings
•
Trace Settings
•
Wavelink Settings
Step 3
From the settings page, select or enter information for those settings.
Step 4
Click Apply.
Profile Settings Fields
The following table lists the fields in the Profile Settings screen.
Table 31: Profile Settings
For more information, see …
DescriptionItem
Provides a name for the profile to make it easy to
identify; up to 63 alphanumeric characters.
Profile Name
Choose Yes or No.Profile Enabled
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
138
Wavelink Avalanche Server
Profile Settings Fields