Cisco 7925G Administration Guide

Step 3
If the Security Alert dialog box displays a notice to accept the Trust Certificate, click Yes or Always to accept
the application.
Step 4
Log in to the web pages with username admin and enter the password Cisco for the phone web pages.
Cisco Unified IP Phone Web Page Information
The web pages for a Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G includes these items
for monitoring the phone:
•
Wireless LAN Statistics: Provides information about the wireless LAN configuration.
•
Network Statistics: Provides information about network traffic.
•
Stream Statistics: Provides information about voice quality items.
Related Topics
Network Statistics Section, on page 204
Stream Statistics Menu, on page 206
Wireless LAN Statistics Section, on page 202
Summary Information Area
The Summary Information area on the phone web page displays network configuration information and
information about other phone settings. The following table describes these items.
To display the Summary Information page, access the web page for the phone as described in the Access Web
Page for Phone, on page 195, and the Home: Summary page displays.
Table 43: Home: Summary Items
DescriptionItem
Directory number assigned to this phonePhone DN
Wireless Information
Name of the profile that the phone is currently usingActive Network Profile
SSID that the phone is currently usingSSID
Name of the access point to which the phone is associatedAccess Point
Media Access Control (MAC) address of the phoneMAC Address
Network Information
Internet Protocol (IP) address of the phoneIP Address
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
196
Remote Monitoring
Cisco Unified IP Phone Web Page Information

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g