Cisco 7925G Administration Guide

For information about entering values, see Network Profile Data Input Guidelines, on page 118.
Step 8
Press Options > Validate to save the entry or press Options > Cancel.
Change Cisco Discovery Protocol Settings
Some network devices do not use Cisco Discovery Protocol (CDP).
To change whether the phone transmits CDP packets and settings associated with CDP, follow these steps in
Cisco Unified Communications Manager Administration:
Procedure
Step 1
Choose Device > Phone.
Step 2
Click Find and locate the phone in the displayed list.
Step 3
Scroll to Device Information.
Step 4
Scroll to Cisco Discovery Protocol (CDP).
Step 5
Click Enabled from the drop-down menu.
Step 6
Click Save and Reset, if prompted.
Erase Network Profile Configuration
You can erase the network profile configuration and return to the default settings.
To erase the configuration, follow these steps:
Procedure
Step 1
Choose SETTINGS > Network Profiles.
Step 2
To select the profile name that you want to configure, scroll to the item and press the View button.
Step 3
Enter **# to unlock the profile and press Edit.
Step 4
Select Network Configuration.
Step 5
Scroll to Erase Configuration and press Yes to erase or No.
Related Topics
Change Profile Name, on page 117
WLAN Configuration Settings, on page 124
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
123
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
DHCP Settings

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g