Cisco 7925G Administration Guide

Procedure
Step 1
Choose Settings menu > Device Information.
Step 2
Use the Navigation button to scroll to one of the categories on the Device Information screen and press Select.
The list of items under the category displays.
Device Information Fields, on page 180 describes the categories and items that appear on this screen.
Step 3
To exit the Device Information screen, press Back.
Device Information Fields
Table 37: Device Information Categories and Items
DescriptionItem
CallManager
Hostnames or IP addresses, in prioritized order, of the Cisco Unified
Communications Manager servers with which the phone can register. An
item can also show the IP address of an SRST router that is capable of
providing limited Cisco Unified Communications Manager functionality.
Each available server displays the Cisco Unified Communications Manager
server IP address and one of the following states:
Active
Cisco Unified Communications Manager server from which the
phone is currently receiving call-processing services.
Standby
Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable.
Blank
No current connection to this Cisco Unified Communications
Manager server.
CallManager1
CallManager2
CallManager3
CallManager4
CallManager5
Network
IP address of the DHCP server from which the phone obtains its IP address.DHCP Server
MAC address of the phone.MAC Address
Unique, fixed name that is automatically assigned to the phone based on
the MAC address.
Host Name
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
180
Security, Device, Model, Status, and Call Statistics Information
Device Information Fields

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g