Cisco 7925G Administration Guide

DescriptionPhone setting
Displays the list of Bluetooth devices available to the phone.Device List
Diagnostics
Performs a diagnostic routine to check a button on the keypad.Keypad
Causes the phone to ring to check the speaker.Audio
Checks the WLAN.WLAN
Checks the bar code scanner.Scanner (Cisco
Unified Wireless IP
Phone 7926G only)
Related Topics
Access Settings Menu, on page 115
Network Profile Settings, on page 116
Set Up Phone Security Certificate, on page 130
Phone Settings Menu, on page 127
Set Up Phone Security Certificate
Security features establish and maintain authenticated communication streams between the phone and the
Cisco Unified Communications Manager server, and digitally sign files before they are delivered.
A Locally Significant Certificate (LSC) installs on phones after you perform the necessary tasks associated
with the Certificate Authority Proxy Function (CAPF). You can use Cisco Unified Communications
Manager Administration to configure an LSC, as described in the Cisco Unified Communications Manager
Security Guide.
Alternatively, you can initiate the installation of an LSC from the Security Configuration menu on the phone.
This menu also lets you update or remove an LSC.
Before you do so, ensure that the appropriate Cisco Unified Communications Manager and the CAPF security
configurations are complete:
•
The CTL file must have a CAPF certificate.
•
The CAPF certificate must exist in the /usr/local/cm/.security/certs folder in every server in the cluster.
•
The CAPF is running and configured.
For more information on certificates, see Cisco Unified Communications Manager Security Guide. For more
information about the security features, see Security Features, on page 14.
Depending on how you have configured the CAPF, this procedure installs an LSC, updates an existing LSC,
or removes an existing LSC.
To configure an LSC on the phone, perform the following steps.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
130
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
Set Up Phone Security Certificate

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g