Buttons and Hardware
The following figure shows the Cisco Unified Wireless IP Phone 7926G. The Cisco Unified Wireless IP
Phone 7925G and 7925G-EX are similar in appearance to the Cisco Unified Wireless IP Phone 7926G. The
following table describes the functions of the keys on the phones.
Provides these indications:Indicator light (LED)1
•
Solid red: Phone is connected to AC power source and battery is
charging.
•
Solid green: Phone is connected to AC power source and battery
is fully charged.
•
Fast blinking red: There is an incoming call. Phone can be charging
or fully charged.
•
Slow blinking red: There is a voice message. When phone is
connected to AC power source, the red light displays longer than
when using only the battery.
•
Slow blinking green (every 2 seconds): Phone is using only battery
power. Phone is registered with the wireless network and is within
service coverage area.
Port for plugging in a headset or ear bud has a protective cover.Headset port with cover2
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
5
Cisco Unified Wireless IP Phone
Buttons and Hardware
To Next Page
Loading...
