page menus, from which you can configure network profiles, USB settings, trace settings, Wavelink
settings, and certificates. Home Web Page Summary Information, on page 73 describes the phone summary
information.
b) Or if you already know the IP address, you can open a web browser and enter the following URL. The
IP_address variable is the IP address of the Cisco Unified IP Phone:
https://<IP_address>/index.html
Step 7
If the Security Alert dialog box displays a notice to accept the Trust Certificate, click Yes or Always to accept
the application.
Step 8
Log in to the Home web page with the default username: admin and enter the default password: Cisco. You
may need to log into additional windows to configure other options.
Step 9
Make changes to configurable pages as needed.
Step 10
Return to the Phone Configuration page in Cisco Unified Communications Manager Administration and set
the Web Access field back to Read Only or Disabled.
Step 11
Reset the phone from Cisco Unified Communications Manager to disable full access to the web pages.
Be sure to change the Web Access privileges and reset the phone to prevent users from making configuration
changes on the phone web pages.
Home Web Page Menu
The following table describes the menu entries in the home web page.
Table 17: Home Web Page Menus
Related informationMenu
Setup
Network Profiles, on page 74Network Profiles
Set Up USB Settings on PC, on page 95USB Settings
Set Up Trace Settings, on page 96Trace Settings
Set Up Wavelink Settings, on page 99Wavelink Settings
Wireless LAN Security, on page 80Certificates
Configurations
Phone Book Setup, on page 100Phone Book
Information
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
72
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Access Phone Configuration Web Page