Cisco 7925G Administration Guide

Trace Settings
•
Number of Files
•
Syslog Server (enabled/disabled)
◦
IP address
◦
Port
•
Modules and error level for collection
•
Preserving Logs (true/false)
Import Configuration Template
To import a phone configuration template, follow these steps.
Procedure
Step 1
Connect the USB cable to an unconfigured phone and access the phone web page using the instructions on
Access Phone Web Page, on page 69.
Step 2
On the phone web page, choose the Backup Settings hyperlink.
Step 3
In the Import Configuration area of the page, enter the Encryption Key.
You must enter the same key that you used to export the configuration template.Note
Step 4
Use the Browse button to locate the configuration template and click Open.
The configuration file downloads to the phone.
Step 5
You can use the web pages to add missing configuration items such as the username and password or make
other changes at this time.
Related Topics
System Settings, on page 104
Trace Logs, on page 105
Upgrade Phone Firmware, on page 108
Administration Password Changes, on page 109
Upgrade Phone Firmware
You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the
USB connection or by using the WLAN.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
108
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Upgrade Phone Firmware

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g