Cisco 7925G Administration Guide

•
Profile Name
•
SSID
•
Single Access Point
•
Call Power Save Mode
•
802.11 Mode
•
WLAN Security
•
Authentication Method
•
User name
•
Password
•
Passphrase
•
Encryption keys
•
Use DHCP to get IP address and DNS servers
•
Static Settings (if configured)
◦
IP Address
◦
Subnet Mask
◦
Default Router
◦
Primary DNS Server
◦
Secondary DNS Server
•
Use DHCP to get TFTP Server
•
Static TFTP Settings (if configured)
◦
TFTP Server 1
◦
TFTP Server 2
Advanced Network Profile Settings
•
Minimum PHY rate
•
Surplus Bandwidth
•
802.11G Power Settings (checked ones)
•
802.11A Power Settings (checked ones)
USB Settings (use one of these)
•
Obtain IP address from server
•
Static settings (if configured)
◦
IP address
◦
Subnet Mask
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
107
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Network Profile Templates

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g