Cisco 7925G Administration Guide

Product-Specific Fields for Cisco Unified Wireless IP Phone
7925G, 7925G-EX, and 7926G
Each Cisco Unified IP Phone has special configuration fields in Cisco Unified Communications Manager
Administration that are available by phone model. The following product-specific configuration fields are
available for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G.
Table 35: Product-Specific Fields
DescriptionOptionsParameter
Turns off the speakerphone capability of the handset.True or FalseDisable
Speakerphone
Enables or disables the ability for the phone to learn MAC addresses from Gratuitous
ARP. This capability is required to monitor or record voice streams.
Enable or disableGratuitous ARP
Enables, disables, or restricts access to local configuration settings in the Settings
menus. With restricted access, only the Phone Settings menu is accessible. With disabled
access, the Settings menu does not display any options.
Enabled, Disabled,
and Restricted
Settings Access
Determines the level of access to the web pages for the phone. Provides Disabled,
Read only, and Full access to a phone’s web pages through a web browser.
Read Only, Full,
Disabled
Web Access
Locks or unlocks the network profiles. If locked, the phone user cannot modify the
network profile.
Unlocked or lockedProfile 1-4
Identifies the alternate server that the phone uses to obtain firmware loads and upgrades.IP address or
hostname for the
server
Load Server
Identifies special phone numbers that do not require unlocking the keypad to call, such
as 911 or an emergency number
up to 16 digits in
length
Special Numbers
Specifies the URL that the phone uses to contact application services.maximum length is
256 characters
Application URL
When enabled, pressing the green button causes the phone to go off-hook.
When disabled, pressing the green button causes the phone to display the list of recently
dialed numbers (for last number redial).
Enable or Disable
“Send” Key Action
Controls the access of the local phone book so that it can be accessed by using the web
page for the phone. This parameter works with the Web Access parameter. When Web
Access is disabled, the local phone book is not accessible.
Enabled or DisabledPhone Book Web
Access
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
162
Features, Templates, Services, and Users
Product-Specific Fields for Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g