Cisco 7925G Administration Guide

For more information, see...DescriptionNetwork setting
Sets the prompt mode to one of the
following options:
•
Enable
•
Disable
Prompt Mode
(Available for Network
Profile 1, when Security
Mode is LEAP,
EAP-FAST, PEAP, or
Auto AKM)
Related Topics
Access Settings Menu, on page 115
Network Profile Settings, on page 116
Set Up Phone Security Certificate, on page 130
Phone Settings Menu, on page 127
Phone Settings Menu
The Phone Settings menu enables configuration of individual phones with ringtones or volume levels, display
settings, keypad settings, and home page settings.
You can control whether a Cisco Unified Wireless IP Phone has access to the Phone Settings menu from
the Cisco Unified Communications Manager Administration Phone Configuration page. Use the Settings
Access field in the Product Specific Configuration section of the phone configuration page.
Note
Related Topics
Product-Specific Fields for Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G, on page
162
Set Up Phone Settings
To access the Phone Settings menu options on a Cisco Unified Wireless IP Phone, follow these steps.
Procedure
Step 1
Choose SETTINGS > Phone Settings.
Step 2
Press the number for the setting that you want to configure or scroll to the setting and press the Select button.
Step 3
Press the number for the setting category or scroll to the setting and press the Select button.
Step 4
Press the number for the setting that you want to change or scroll to the setting and press the Select button.
For descriptions of the settings, see Phone Settings Fields, on page 128. For specific instructions to change
these settings, see “Configure Phone Settings” in the Cisco Unified Wireless IP Phone 7925G, 7925G-EX,
and 7926G User Guide.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
127
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
Phone Settings Menu

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g