EasyManuals Logo

Cisco 7925G Administration Guide

Cisco 7925G
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
If you uncheck all channels in the 802.11 G Power Settings or 802.11 A Power Settings, the phone will
not be able to access the WLAN.
Note
Related Topics
Network Profile Settings, on page 75
USB Settings Field
You can change the IP address of the USB port on your phone by choosing one of the following options in
the DHCP Enabled field:
Yes
Obtains an IP address automatically.
No
You can specify the IP address and subnet mask on this page.
Related Topics
Set Up USB Settings on PC, on page 95
Trace Settings Fields
You can configure trace settings to determine how the phone creates and saves trace files. The following table
describes the trace settings.
Table 32: Trace Settings
DescriptionItem
Choose the number of trace files that the phone saves, from 2 to 10 files.Number of Files
Set up a remote server to store trace logs. If enabled, enter remote address and
remote port.
Enable Remote Syslog
Enter remote IP address if Enable Remote Syslog is enabled.Remote IP Address
Enter a port number if Enable Remote Syslog is enabled. Valid values are: 514
and 1024 to 65535.
Remote Port
Operating System data.Kernel Level
Phone configuration data.Configuration Level
Cisco Unified Communications Manager data.Call Control Level
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
143
Wavelink Avalanche Server
USB Settings Field

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals