Cisco 7925G Administration Guide

Cisco Unified Wireless IP Phones Setup in Cisco Unified
Communications Manager
To provide telephony call routing and call-control features for the Cisco Unified Wireless IP Phone 7925G,
7925G-EX, and 7926G, you must use Cisco Unified Communications Manager Administration. For instructions
about adding these devices, see the “Cisco Unified IP Phone Configuration” chapter in the Cisco Unified
Communications Manager Administration Guide.
Telephony Features Available
The following table describes supported telephony features that you can configure using Cisco Unified
Communications Manager Administration for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and
7926G. The table provides references to documentation that contains configuration procedures and feature
information.
For information about using the features on the phone, see Cisco Unified Wireless IP Phone 7925G, 7925G-EX,
and 7926G User Guide for Cisco Unified Communications Manager.
Cisco Unified Communications Manager Administration also provides several service parameters that
you can use to configure various telephony functions. For more information about service parameters and
the functions that they control, you can use the I or ? button on the Cisco Unified Communications Manager
configuration page.
Note
Table 34: Telephony Features for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
Configuration ReferenceDescriptionFeature
For more information, see Radio Frequency
Ranges, on page 25.
Enables the wireless phones to use the 5 GHz channel in
Thailand.
5 GHz Channel
Support for Thailand
No configuration required.Increases the amount of Java MIDP memory available for the
Cisco Unified Wireless IP Phone 7926G.
7926G J2ME
Memory Increase
No configuration required.Enables USB driver support for Microsoft Windows 7.792x USB Driver
Support for
Microsoft Windows
7
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
148
Features, Templates, Services, and Users
Cisco Unified Wireless IP Phones Setup in Cisco Unified Communications Manager

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g