Cisco 7925G Administration Guide

•
System Configuration
•
Device Information
•
Model Information
•
Status
These options are configurable; other options are display
only.
Note
Step 3
To select the item that you want to configure or view, perform one of these actions:
•
Use the Navigation button to scroll to the item and then press the Select button.
•
Use the keypad to enter the number that corresponds to the item.
Step 4
If a menu option is locked , press ** # on the keypad to unlock the option.
When the menu is unlocked, displays.
Related Topics
Network Profile Settings, on page 116
Phone Settings Menu, on page 127
Set Up Phone Security Certificate, on page 130
Change USB Port Setup, on page 131
Network Profile Settings
On the Cisco Unified Wireless IP Phone, you can configure four network profiles for a specific WLAN. Users
who travel between company locations can have separate network profiles for each WLAN location. You can
set up profiles with the local SSID, WLAN settings, and authentication information for each location.
You can control whether a Cisco Unified Wireless IP Phone has access to the Network Profiles menu
from the Cisco Unified Communications Manager Administration Phone Configuration page. Use the
Settings Access field in the Product Specific Configuration section of the phone configuration page.
Note
The following sections provide information about configuring network profiles.
Related Topics
Product-Specific Fields for Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G, on page
162
Access Network Profile Menu
To view or configure the Network Profile menu on a Cisco Unified Wireless IP Phone, follow these steps.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
116
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
Network Profile Settings

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g