EasyManuals Logo

Cisco 7925G Administration Guide

Cisco 7925G
274 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
DescriptionItem
Wireless Information
Name of the profile that the phone is currently using.Active Network Profile
SSID that the phone is currently using.SSID
Name of the access point (AP) to which the phone is associated.Access Point
MAC address of the phone.MAC Address
Network Information
IP address of the phone.IP Address
Subnet mask used by the phone.Subnet Mask
IP address for the default gateway that the phone is using.Default Router
IP address for the primary TFTP server that the phone is using.TFTP Server
Call Manager Information
IP address for the Cisco Unified Communications Manager server to
which the phone is registered.
Active Unified CM
Primary DN for the phone.Phone Directory Number
Related Topics
Access Phone Web Page, on page 69
Network Profiles, on page 74
Set Up USB Settings on PC, on page 95
Set Up Trace Settings, on page 96
Phone Book Setup, on page 100
System Settings, on page 104
Network Profiles
You can configure up to four profiles for a phone to take advantage of WLAN environments. You can add
names to the profiles and enable one or more of the profiles for the phone to use. The Network Profiles section
of the web page displays the following information about each phone:
Profile
Displays a list of four configurable profiles.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
74
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Network Profiles

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals