Cisco 7925G Administration Guide

Configuration ReferenceDescriptionFeature
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide, “Cisco
Unified IP Phone Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phone” chapter
Allows users to speed dial a phone number by entering an
assigned code (1-99) on the phone keypad. Users assign the
codes from the User Options web pages.
Abbreviated Dialing
For more information, see the Cisco Unified
Communications Manager Administration
Guide:
•
For Cisco Unified Communications
Manager Release 5.0 or later, see the
“Configuring Directory Numbers”
chapter
•
For Cisco Unified Communications
Manager Release 4.x, see the “Phone
Configuration” chapter
Connects incoming calls automatically after a ring or two to
the speakerphone or headset if attached.
Auto Answer
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Call Pickup Group
Configuration” chapter.
Allows a user to use one-touch pickup functionality for call
pickup, group call pickup, and other group call pickup.
Auto-pickup
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide, “Device
Pool Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter
•
Cisco Unified Communications
Manager Features and Services Guide,
“Barge and Privacy” chapter
Allows a user to join a nonprivate call on a shared phone line.
Barge features include cBarge, Barge, and Single Button Barge.
•
cBarge adds a user to a call and converts it into a
conference, allowing the user and other parties to access
conference features.
•
Barge adds a user to a call but does not convert the call
into a conference.
•
Single Button Barge enables users to Barge or cBarge
into a remote-in-use call on a shared line.
The phones support Barge in two conference modes:
•
Built-in conference bridge at the target device (the phone
that is being barged). This mode uses the Barge softkey.
•
Shared conference bridge. This mode uses the cBarge
softkey.
The Barge and Privacy features work
together.
Note
Barge
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
149
Features, Templates, Services, and Users
Telephony Features Available

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g