Cisco 7925G Administration Guide

Configuration ReferenceDescriptionFeature
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “External Call Transfer
Restrictions” chapter.
Prevents users from transferring an external call to another
external number.
Block external to
external transfer
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Presence” chapter.
Allows a user to monitor the call state of a directory number
(DN) associated with a speed-dial button. The available states
are: alerting, idle, busy, and do not disturb (DND). During the
alerting state, call pickup capability is enabled.
This feature is not supported in Cisco Unified
Communications Manager Release 4.x.
Note
Busy Lamp Field
(BLF) speed dial
For more information, see:
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter
•
Cisco Unified Communications
Manager Features and Services Guide,
“Call Back” chapter
Provides users with an audio and visual alert on the phone
when a busy or unavailable party becomes available.
Call Back
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide, “Cisco
Unified IP Phone Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Understanding
Route Plans” chapter
•
Cisco Unified Communications
Manager Features and Services Guide,
“Call Display Restrictions” chapter
Determines the information that will display for calling or
connected lines, depending on the parties who are involved in
the call.
Call display
restrictions
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number Configuration”
chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco Unified
IP Phones” chapter
•
Customize User Options Web Page
Display, on page 173
Allows users to redirect incoming calls to another number.
Call forward options include Call Forward All, Call Forward
Busy, Call Forward No Answer, and Call Forward No
Coverage.
Call forward
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
150
Features, Templates, Services, and Users
Telephony Features Available

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g