Cisco 7925G Administration Guide

For more information, see …
DescriptionItem
WLAN Settings
Assigns the Service Set Identifier (SSID) to this
profile. You must assign the same SSID to the
phone that is also assigned to access points in the
wireless network.
SSID
802.11 Standards for WLAN
Communications, on page 24
Determines the signal mode or priority for
selecting signal modes available in the WLAN.
Options are:
•
802.11 b/g: Use only 2.4 GHz band
•
802.11a: Use only 5 GHz band
•
Auto, 802.11b/g preferred over 802.11a
(dual-band)
•
Auto, 802.11a preferred over 802.11b/g
(dual-band)
The preferred band, if available, is used
at power-on, but the phone may switch
to the less-preferred 2.4 GHz band, if
available, and the preferred band is lost.
After the phone has connected to the
less-preferred band, it does not scan for
the preferred band if the current band is
acceptable, and will remain connected
to the less-preferred band.
Note
•
Auto, signal strength (RSSI): Use strongest
signal in dual-band environment
WLAN Mode
802.11 Standards for WLAN
Communications, on page 24
Set for the type of power saving mode used in the
WLAN. Options are:
•
U-APSD/PS-Poll
•
None
Call Power Save
Mode
WLAN Security
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
139
Wavelink Avalanche Server
Profile Settings Fields

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g