Cisco 7925G Administration Guide

To obtain an IP address automatically from the PC, choose Enable, then press Save. You have completed
the USB configuration.
•
•
To use a static IP address, choose Disable, then press Save.
If you disabled DHCP, you must enter an IP address and a subnet mask by performing Steps 5 through
12.
Note
Do not perform the following steps if DHCP is
enabled.
Note
Step 5
To change the static IP address, scroll to IP Address, and press Select.
Step 6
Enter a new IP address that is not assigned on the subnet.
Step 7
To save the changes, press Options > Save.
Step 8
To change the subnet for the new IP address, scroll to Subnet Mask and press Select.
Step 9
Enter the appropriate subnet address.
Step 10
To save the changes, press Save.
Related Topics
Access Settings Menu, on page 115
Network Profile Settings, on page 116
Set Up Phone Security Certificate, on page 130
Phone Settings Menu, on page 127
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
132
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
Change USB Port Setup

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g