Cisco 7925G Administration Guide

Procedure
Step 1
Gather the following information about the phone:
•
Phone model
•
MAC address
•
Name or user ID of phone user
•
Device pool
•
Partition, calling search space, and location information
•
Number of lines and associated directory numbers (DNs) to assign to the phone
•
Cisco Unified Communications Manager user to associate with the phone
•
Phone usage information that affects softkey template, phone features, IP Phone services, or phone
applications
This step provides a list of configuration requirements for setting up phones and identifies preliminary
configuration that you need to perform before configuring individual phones, such as phone button templates
or softkey templates.
For more information, see
• Cisco Unified Communications Manager System Guide, “Cisco Unified IP Phone” chapter
•
Telephony Features Available, on page 148
Step 2
Customize phone button templates (if required) to change the number of line buttons, speed-dial buttons,
Service URL buttons, or to add a Privacy button to meet user needs.
For more information, see
• Cisco Unified Communications Manager Administration Guide, “Phone Button Template Configuration”
chapter
•
Phone Button Templates, on page 167
Step 3
Add and configure the phone by completing the required fields in the Phone Configuration window. Required
fields are indicated by an asterisk (*) next to the field name; for example, MAC address and device pool.
This step adds the device with its default settings to the Cisco Unified Communications Manager database.
For more information, see
• Cisco Unified Communications Manager Administration Guide, “Cisco Unified IP Phone Configuration”
chapter
• “?” Button Help in the Phone Configuration window
Step 4
Add and configure directory numbers (lines) on the phone by completing the required fields in the Directory
Number Configuration window. Required fields are indicated by an asterisk (*) next to the field name; for
example, directory number and presence group.
This step adds primary and secondary directory numbers and features associated with directory numbers to
the phone.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
242
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Overview
Cisco Unified Communications Manager Setup for Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g