Cleaver-Brooks ClearFire CFLC-5000 - Boiler Pump

Appendix E Falcon Lead Lag
E-31
Figure 19 - Boiler Pump
Boiler pump
Logout
Control
Settings>>
Pump Configuration
On options
Force on
Pump exercise settings apply to all
pumps
Pump exercise interval
Pump exercise time
*Inhibit pump for burner fault or disable
Miscellaneous
Boiler pump
Pump control
Pump output
Pump start delay
Overrun time
Logout
Advanced
Settings>>
Use for local (Stand-alone) demands
Use for Lead Lag Master demands
Pump Configuration
Boiler pump
Logout
Control
Settings>>
Pump Configuration
On options
Force on
Force off
Misce
Central Heat:
DHW:
Local Lead Lag:
Frost Protection:
Aux pump:
Local burner demand*
Demand*
Demand*
Pump demand
Central Heat
X is set
Z is set
Y is set
Service active*
Service active*
Service active*
DHW
*This setting may be inhibited due
to burner fault or disable
Boiler pump
Logout
Control
Settings>>
Pump Configuration
On options
Force on
Force off
Misce
*This setting may be inhibited due
to burner fault or disable
Force pump on when:
Local burner demand*
Outlet high limit
Lead Lag slave demand
Boiler pump
Logout
Control
Settings>>
Pump Configuration
On options
Force on
Force off
Misce
*This setting may be inhibited due
to burner fault or disable
Force pump off when:
DHW priority is active
DHW high limit
CH anti-condensation
DHW anti-condensation
Pump B
10 sec
3 min
Auto






BOILER
PUMP
(L/L Slave)