www.cleaverbrooks.com
Section 5
Service and Maintenance
Disassembly for Inspection ...................................................... 5-2
Reassembly .......................................................................... 5-4
Ignition and Flame Detection Systems ...................................... 5-4
Troubleshooting .................................................................... 5-6
Extended Shutdown................................................................ 5-8
Emergency Shutdown ............................................................. 5-8
!
Caution
Label all wires prior to disconnection when
servicing controls. Wiring errors can cause
improper and dangerous operation.Failure to
do so may result in equipment failure.
!
Caution
Verify proper operation after servicing.
Failure to do so may result in equipment
failure.