ComAp InteliDrive DCU Marine Reference Guide

ID-DCU-MARINE-2.2.2, ©ComAp – June 2015 - 152 -
ID-DCU-MARINE-2.2.2.pdf
WebSupervisor
WebSupervisor is web based system designed for monitoring and controlling ComAp controllers via the
Internet. This system offers a number of beneficial features that help optimize revenue for machinery fleets,
as each piece of equipment can be individually monitored for all important operation values.
ID-DCU Marine connection into WebSupervisor
Connection of ID-DCU Marine controllers can be realized in two different ways:
1. Internet connection via AirGate - using InternetBridge-NT (IB-NT). No fixed and public IP
address is needed.
2. Internet connection without AirGate - using InternetBridge-NT (IB-NT) or IG-IB module. The
module has to have fixed and public IP address.
Hint:
The WebSupervisor ComAp tool is supported from ID-DCU Marine version 2.2, specifically from
ID-DCU-MARINE-W-2.2.mhx firmware.

ComAp InteliDrive DCU Marine Specifications

General

Brand	ComAp
Model	InteliDrive DCU Marine
Category	Controller
Language	English