ComAp InteliDrive DCU Marine Reference Guide

ID-DCU-MARINE-2.2.2, ©ComAp – June 2015 - 80 -
ID-DCU-MARINE-2.2.2.pdf
RPU-SD 2
Indication of ID-RPU Shut down 2 input state.
RPU-SD 3
Indication of ID-RPU Shut down 3 input state.
RPU-SD 4
Indication of ID-RPU Shut down 4 input state.
RPU-SD 5
Indication of ID-RPU Shut down 5 input state.
EmStop RPU
Indication of ID-RPU Emergency stop input state.
Source: Binary Inputs
List (depend on modules configuration) contains all Extension modules binary inputs that can be configured
to any Binary outputs. This source contains binary inputs physical states (no protection activity).
Source: J1939
Following list contains all binary values received from J1939 that can be configured to Binary outputs. This
list depends on selected ESF file. For more detail see corresponding engine specification.
Running
Engine running state indication.
Overspeed
Engine overspeed indication.
OilPress
Oil pressure out of limit indication.
OilTemp
Oil temperature out of limit indication.
CoolantTemp
Coolant temperature out of limit indication.
Coolant Level
Coolant level out of limit indication.

ComAp InteliDrive DCU Marine Specifications

General

Brand	ComAp
Model	InteliDrive DCU Marine
Category	Controller
Language	English