ComAp InteliDrive DCU Marine - Abbreviations

ID-DCU-MARINE-2.2.2, ©ComAp – June 2015 - 5 -
ID-DCU-MARINE-2.2.2.pdf
Abbreviations
aid
Archive file extension for InteliDrive controller
AIN
Controller or extension module Analog input
Alarm
General term for any active engine protection Warning, Shutdown, … etc.
Alarm list
Controller or PC InteliMonitor screen with list of active and unaccepted alarms
detected from ID controller.
ECU Alarm list
Controller or PC InteliMonitor screen with list of active and unaccepted alarms
detected from engine ECU.
AOUT
Controller Analog OUTput or outputs group.
Archive
Usually aid file that contains all controller data: configuration, setpoints setting and
history records.
AUX
Controller application (archive, operational mode) for Auxiliary engines.
BI
Controller binary input.
BIN
Controller binary inputs group.
BO
Controller binary output.
BOUT
Controller binary outputs group.
CAN
Control Area Network – serial data link.
Cd
Cool down protection, cooling period is included before engine stops.
CMB
Controller Combined mode.
D+
Controller function for battery charging function check and/or engine running
indication.
DC
DriveConfig, PC software for InteliDrive configuration.
DM
DriveMonitor, PC software for InteliDrive monitoring (discontinued in Q3 2013).
DriveConfig
PC software for InteliDrive configuration.
DriveMonitor
PC software for InteliDrive monitoring (discontinued in Q3 2013).
ECU
Engine Electronic (injection) Control Unit.
ECU alarm
Alarm detected in engine electronic control unit that is received via J1939.
EFI
Electronic fuel injection
EME
InteliDrive Emergency operational mode.
EMS I.
Electronic Management System – version I.
EMS II.
Electronic Management System – version II.
Fls
Sensor fail alarm – prefix.
FMI
Failure Mode Identifier.
GSM modem
Modem for Global System of Mobile communication
History
List of alarms and operational states with Reason, Date and Time and adjustable
values set that is stored in controller, can be listed from the screen or InteliMonitor.
HRB
Controller Harbor mode.
I-AOUT8
Controller extension module with 8 analog outputs: 10V or 20mA.
I-CB
Inteli – Communication bridge = controller interface for other electronic engines
like MTU, CAT etc.. that are not supported yet.
I-LB, I-LB+
Modem Unit = one point interface for multiple controllers connected via CAN2 bus.
InteliVision 5 CAN
InteliVision 5 CAN Backlit
InteliVision 8
InteliVision 8 Marine
ComAp color display 5 or 8 inch.
ID
InteliDrive controller.
ID-COM
InteliDrive communication module with interface to J1939, J1587 and to other
controllers.
ID-DCU MARINE
InteliDrive DCU Marine controller.
ID-MCU
InteliDrive DCU Marine controller with Volvo Penta front panel modification.