ComAp InteliDrive DCU Marine Reference Guide

ID-DCU-MARINE-2.2.2, ©ComAp – June 2015 - 154 -
ID-DCU-MARINE-2.2.2.pdf
PC to ID-DCU MARINE controller connection
 Uploading or downloading procedure only (no continuous on-line connection)
 Direct RS232 connection
 Modem and internet connection
Configuration steps
Following configuration steps are available in DriveConfig software:
 Configure addresses of Extension modules when more inputs and outputs are required
 Configure J1939/J1587 interface when Electronic engine is connected
 Configure Binary inputs as Protection or Function
 Configure Binary outputs
 Configure Analog inputs as Protection or Function
 Define user sensors
 Configure History record
 Configure password protection
 Add/Translate the language
Translator
The Translator enables to translate all or some texts to up 5 languages that are all available in controller.
Controller language can be changed from panel buttons. It is possible to operate different languages on each
ID-DCU MARINE, Remote panel and Drive Monitor.
Hint:
Check all screens if some texts are not shortened.

ComAp InteliDrive DCU Marine Specifications

General

Brand	ComAp
Model	InteliDrive DCU Marine
Category	Controller
Language	English