User's Manual
98
Parameter Description
Data Bits The default value is 8.
Stop Bits The default value is 1.
Parity The default value is NONE.
Step 3 Click
Apply
to save the settings.
Click
Copy
to copy the settings to other channels.
5.4.2 Working with PTZ Control Panel
PTZ control panel performs the operations such as directing camera in eight directions, adjusting
zoom, focus and iris settings, and quick positioning.
Basic PTZ Control Panel
Right-click on the live view screen and then select
PTZ
. The PTZ control panel is displayed.
Figure 5-52 PTZ control panel
The functions with buttons in gray are not supported by the system.
Table 5-23 PTZ control panel description
Parameter Description
Speed
Controls the movement speed. The bigger the value is, the faster the
movement will be.
Zoom
: Zoom out.
: Zoom in.
Focus
: Focus far.
: Focus near.
Iris
: Image darker.
: Image brighter.
PTZ movement Supports eight directions.
To Next Page
Loading...
Need help?
General
