User's Manual
81
Figure 5-39 Properties
5.2.6 Channel Sequence
You can adjust the channel sequence displayed on live page on actual needs.
The live view page displays the default channel sequence after restoring factory defaults.
Procedure
Step 1 Right-click on the live view page and select
Sequence
.
●
The system displays the maximum number of window splits supported by the DVR
after selecting
Sequence
.
●
The Sequence page displays only the channel name and channel number of added
remote devices. represents the remote device is online, and represents the
remote device is offline.
To Next Page
Loading...
Need help?
General
