User's Manual
131
Figure 5-84 Modify IP
3. Set incremental value.
The system will add the incremental value to the fourth segment of IP addresses of selected
devices.
4. Configure the settings for start IP address (the IP address is allocated in sequence), subnet
mask, default gateway, username, and password.
5. Click
OK
to save the settings.
5.6.1.6 Exporting IP Address
You can export the added IP address to the USB storage device.
The exported information is saved in .csv file, which includes IP address, port number, channel
number, manufacturer, username, and password.
Procedure
Step 1 Insert the USB storage device to the USB port of the Device.
Step 2 Click
Export
.