User's Manual
173
Figure 5-127 Video tampering
Step 2 Configure the settings for the tampering detection parameters. For details, see
"5.10.4.1
Configuring Motion Detection Settings".
For PTZ activation, different from motion detection, the video loss detection can activate
PTZ preset, tour, and pattern.
Step 3 Click
Apply
to complete the settings.
●
Click
Default
to restore the default setting.
●
Click
Copy to
, in the
Copy to
dialog box, select the additional channel(s) that you want
to copy the motion detection settings to, and then click
Apply
.
5.10.5 System Events
You can configure the alarm output for three types of system event (HDD, Network, and User). When
there is an abnormal system event occurs, the system activates alarms in the way that you configure
in this section.
5.10.5.1 Configuring HDD Event Settings
Procedure
Step 1 Select
Main Menu
>
ALARM
>
Exception
>
Disk
.