User's Manual
64
The Device is added and displayed on the live view page of the cell phone.
5.1.4.6 Configuring Encode Settings
You can configure the settings of main stream and sub stream for the Device.
You can also configure encode settings by selecting
Main Menu
>
CAMERA
>
Encode
>
Audio/Video
.
Procedure
Step 1 After you have configured the P2P settings, on the
Audio/Video
page, click
Next
.
Figure 5-23 Encode
Step 2 Configure the settings for the main/sub streams parameters.
Table 5-6 Parameter description
Parameter Description
Channel
In the
Channel
list, select the channel that you want to configure the
settings for.
Smart Codec
Enable the smart codec function. This function can reduce the video
bit stream for non-important recorded video to maximize the storage
space.
Type
●
Main Stream: In the
Type
list, select
General
,
MD
(Motion Detect),
or
Alarm
.
●
Sub Stream: This setting is not configurable.