User's Manual
103
5.4.4 Calling PTZ Functions
After you have configured the PTZ settings, you can call the PTZ functions for monitoring from the
expanded PTZ control panel.
Figure 5-59 Expanded PTZ control panel
5.4.4.1 Calling Presets
Procedure
Step 1 On the expanded PTZ Control Panel, in the
No.
box, enter the value of the preset that you
want to call.
Step 2 Click to call the preset.
Step 3 Click again to stop calling the preset.
5.4.4.2 Calling Tours
Procedure
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the tour that you
want to call.
Step 2 Click to call the tour.
Step 3 Click again to stop calling the tour.
5.4.4.3 Calling Patterns
Procedure
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the pattern that you
want to call.
Step 2 Call to call the pattern.
Step 3 The PTZ camera moves according to the configured pattern repeatedly.
Step 4 Click again to stop calling the pattern.
5.4.4.4 Calling Auto Scan
Procedure
Step 1 On the expanded PTZ control panel, in the
No.
box, enter the value of the border that you
want to call.
Step 2 Click .