User's Manual
235
Figure 5-199 Temperature/Humidity
Step 2 Select the
Enable
checkbox to enable IoT function.
Figure 5-200 Enable
The Device starts detecting the temperature and humidity data from the camera and
display on the
Realtime Display
page.
Step 3 (Optional) Set temperature displaying mode.
When
Show°F (Fahrenheit Degree)
is selected, the temperature will be displayed by
Fahrenheit degree in
Realtime Display
tab.
5.12.2.2 Viewing Temperature and Humidity Data
You can view the temperature and humidity data on the
Realtime Display
page after the IoT
function is enabled.
In the
Refresh Interval
box, select data refresh interval. For example, you can select
5 Sec
.
You can also display the temperature and humidity data in graphical way by selecting the
Display
Chart
checkbox.