User's Manual
292
5.18.7 Configuring HDD Detecting Settings
This function is available on select models.
HDD detecting function detects the current status of HDD to let you know the HDD performance
and replace the defective HDD.
5.18.7.1 Checking HDD
You can detect HDD by key area detect and global detect.
●
Key area detect: Detect the files saved in HDD. The detected bad track can be repaired by
formatting. If there are no files in HDD, the system cannot detect the bad track.
●
Global detect: Detect the whole HDD through Windows, which takes time and might affect the
HDD that is recording the video.
Procedure
Step 1 Select
Main Menu
>
STORAGE
>
Disk Check
>
Manual Check
.
Figure 5-265 Manual check
Step 2 In the
Type
list, select
Key Area Detect
or
Global Check
; and in the
Disk
list, select the
HDD that you want to detect.
Step 3 Click
Start Check
.
The system starts detecting the HDD.
During detecting, click
Pause
to pause detecting, click
Continue
to restart detecting, and
click
Stop Detect
to stop detecting.
To Next Page
Loading...
Need help?
General
