User's Manual
158
Parameter Description
Video Matrix
Select the checkbox to enable the function. When an alarm event
occurs, the video output port outputs the settings configured in
Main Menu
>
DISPLAY
>
Tour Setting
.
This function is available on select models.
Buzzer Select the checkbox to activate a buzzer noise at the Device.
Log
Select the checkbox to enable the Device to record a local alarm
log.
Disarming
After enabling this function, you can connect a switch to the alarm
input port for disarming control.
Step 3 Click
Apply
to complete the settings.
●
Click
Default
to restore the default setting.
●
Click
Copy to
, in the
Copy to
dialog box, select the additional channel(s) that you want
to copy the local alarm settings to, and then click
Apply
.
5.10.2.2 Configuring Alarms from Alarm Box
You can connect the alarm box to the RS-485 port of the Device. When the alarm is detected by the
alarm box, the alarm information will be uploaded to the Device, and then the Device outputs the
alarms in the way that you configure in this section.
Procedure
Step 1 Select
Main Menu
>
ALARM
>
Alarm-in Port
>
Alarm Box
.